Features
- ULPA filters (as per IEST-RP-CC001.3 and HEPA (H14) filter as per EN 1822) with a typical efficiency of >99.995% at 0.1 to 0.3 microns, providing ISO Class 3 air cleanliness as per ISO 14644-1
- FDA-grade pressure-tight static seals
- Sentinel™ Gold microprocessor controller supervises all functions and monitors airflow and pressure in real-time
- Robust dual-wall construction. Unique Esco Dynamic Chamber™ plenum surrounds filter seals with negative pressure
- Safe-change cuff rings permit hypalon sleeve changes with zero risk of work zone or environment contamination
Principle
Total Exhaust
- Ambient air is pulled through the inlet pre-filter and main filter via the main fans at the top of the isolator. This creates positive pressure on the plenum which provides the downflow of air with a velocity of 0.40 m/s ± 20%.
- The pre-filter extends the life of the filters by trapping larger particulates that can easily clog the main filters
- This downflow supply then provides an ISO Class 5 environment and unidirectional airflow inside the isolator; thus, protecting the materials inside the main chamber and pass-through.
- Air from the work zone and pass-through is then quickly purged by the fans to keep the area clean. The purge is completely exhausted through HEPA filters as well; ensuring that only clean air is exhausted back to the environment.
Models
| Guide to Isolator Class III Models | |||||||||
| SCI-2G8-N3SL-III-EG | |||||||||
| Isolator Unit | Model | No. of gloves – Nominal Width | Electrical Requirements | Code | External Construction | ||||
| Streamline® Compounding Isolator (SCI) | SCI | 2G | 5 ft (1.6m) | 8 | 220-240 V AC, 50/60Hz, 1Ø | N3 | Process zone: -125 Pa | EG – Electrogalvanized Steel | |
| 3G | 6 ft (1.95m) | 9 | 110-120 V AC, 50/60Hz, 1Ø | Pass-through zone: -75 Pa | SS – Stainless Steel 304 | ||||
Upon ordering, input material of construction at the end of the model code: SCI-2G_-N3SL-III-SS or EG
- SS: Full SS 304 stainless steel exterior
- EG: Electrogalvanized steel with ISOCIDE™ coating
Accessories
Standard Accessories
- Electromagnetic interlocking doors to prevent cross-contamination
- Foot switch included to easily open the inner doors
- Single-piece or multi-piece stainless steel 316L work top
- Energy efficient LED lighting with higher durability and better quality
Electrical Outlets and Utility Fittings
- Electrical outlet, ground fault, North America
- Electrical outlet, Euro/Worldwide
Support Stands
- Fixed height, available 711 mm (28″) or 864 mm (34″) – With levelling feet, ± 38.1 mm (1.5″) (SAL) – With casters (SPC)
- Telescoping height stand for levelling feet (STL), nominal range 660 mm to 960 mm (26″to 37.8″)
- Telescoping height stand for casters (STC), nominal range 660 mm to 880 mm (26″ to 34.6″) – Adjustable in 25.4 mm (1″) increments
- Infinitely adjustable hydraulic stand with casters elevates to accommodate a sitting or a standing user’s work surface height (SHM)
Other Accessories
- External material of construction:
- Electrogalvanized steel with ISOCIDE™ powder coating
- Stainless steel 304
- Carbon Filter
- IV bar, with hooks
- UV lamp
- Manual Latches
- Manual Volumetric Damper
- Top Exhaust collar
- Side Exhaust Connection
- Anti-blowback valve
- Perforated shelf to increase work zone space
- Alarm package
- Adjustable foot rest
- Monitor System
- Mounted on the rear of the isolator
- Beside the front panel; equipped with a keyboard and mouse arm
- Glove Leak Tester
- Automated pressure hold testing (APHT)
- With Mobile Compressor
- Without Mobile Compressor
- CCTV integration
- On the side of the process chamber with acrylic viewing panel
- Back-up battery for the electromagnetic interlocks (contact Esco for more information)
